Defect Analysis of Printing Process in Offset Printing Industry by Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA)

Article Sidebar

PDF
Published: Dec 27, 2022
DOI: https://doi.org/10.28932/jis.v5i2.5241
Keywords:
defect, failure mode and effect analysis, fault tree analysis

Main Article Content

Ig. Jaka Mulyana
Program Studi Teknik Industri Universitas Katolik Widya Mandala Surabaya
Samuel Sindhunata Hartoyo
PT Transcon Indonesia, Deliserdang
Martinus Edy Sianto
Program Studi Teknik Industri Universitas Katolik Widya Mandala Surabaya

Abstract

KOP Corp. is an offset printing company, especially in packaging printing (folding boxes).  KOP Corp. faced many defects in production.  This has an impact on increasing cost and customer dissatisfaction.  This paper discusses Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) to find root cause of problem. FMEA use to prioritized sources of problem. Moreover, FTA is used for finding out the root of the problem.  Based on Risk Priority Number (RPN), three failure modes with the largest RPN, namely defect printed, color is not up to standard and defect in the picture. By using the FTA method, analyzed the root problems of these failure modes. After creating a Fault Tree Diagram and looking for a minimum Cut Set, it can be recommended several improvements such as the socialization of a good sampling plan, the design of a training program, Quality Control Circle development, and the selection of good suppliers.

Downloads

Download data is not yet available.

Article Details

How to Cite
Mulyana, I. J., Hartoyo, S. S., & Sianto, M. E. (2022). Defect Analysis of Printing Process in Offset Printing Industry by Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA). Journal of Integrated System, 5(2), 143–155. https://doi.org/10.28932/jis.v5i2.5241
Issue
Vol. 5 No. 2 (2022): Journal of Integrated System Vol. 5 No. 2 (Desember 2022)
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

By submitting an article with the title above and acceptance publication of the article, I declare that:

  • Articles have never been previously published in scientific journals, proceedings or other electronic journals.
  • I agree that the article copyright is fully owned by the Journal of Integrated System, Universitas Kristen Maranatha. Declaration of copyright transfer from the author's to the journal is done by completing the following form (Copyright Transfer Agreement). 

Journal of Integrated System (JIS) uses a Copyright policy under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.

References

Alruqi, M. et al. (2021) ‘A structured approach for synchronising the applications of failure mode and effects analysis’, Management Systems in Production Engineering, 29(3), pp. 165–177. Available at: https://doi.org/doi:10.2478/mspe-2021-0021.

Boral, S. et al. (2020) ‘An integrated approach for fuzzy failure modes and effects analysis using fuzzy AHP and fuzzy MAIRCA’, Engineering Failure Analysis, 108. Available at: https://doi.org/10.1016/j.engfailanal.2019.104195.

Ebrahemzadih, M. et al. (2014) ‘Assessment and risk management of potential hazards by failure modes and effect analysis (FMEA) method in Yazd Steel Complex’, Open Journal of Safety Science and Technology, 04(03), pp. 127–135. Available at: https://doi.org/10.4236/ojsst.2014.43014.

Mitra, A. (2012) Fundamentals of quality control and improvement. 3rd edn. New Jersey: John Wiley & Sons, Inc. Available at: https://doi.org/10.1002/9781118491645.

Ng, W.C. et al. (2017) ‘The integration of FMEA with other problem solving tools: a review of enhancement opportunities’, Journal of Physics: Conference Series, 890(1). Available at: https://doi.org/10.1088/1742-6596/890/1/012139.

Ruijters, E. and Stoelinga, M. (2015) ‘Fault tree analysis: a survey of the state-of-the-art in modeling, analysis and tools’, Computer Science Review, 15, pp. 29–62. Available at: https://doi.org/10.1016/j.cosrev.2015.03.001.

Schmitt, J.C. and Lima, C.R.C. (2016) ‘Failure analysis method using the integration of tools DMAIC, RCA, FTA and FMEA | Método de análise de falhas utilizando a integração das ferramentas DMAIC, RCA, FTA e FMEA’, Espacios, 37(8), pp. 3–20.

Shafiee, M., Enjema, E. and Kolios, A. (2019) ‘An integrated FTA-FMEA model for risk analysis of engineering systems: a case study of subsea blowout preventers’, Applied Sciences, 9(6), p. 1192. Available at: https://doi.org/10.3390/app9061192.

Stamatis, D.H. (2015) The ASQ pocket guide to failure mode and effect analysis (FMEA). Wisconsin: ASQ.

Waghmode, L.Y.. and Patil, R.B. (2016) ‘An overview of fault tree analysis (FTA) for reliability analysis’, Journal of Engineering Research and Studies, IV(March 2013), pp. 06–08.

Wang, J., Yang, Z. and Kang, M. (2018) ‘Application research of fault tree analysis in grid communication system corrective maintenance’, IOP Conference Series: Earth and Environmental Science, 108(5), p. 052099. Available at: https://doi.org/10.1088/1755-1315/108/5/052099.

Wu, Z., Liu, W. and Nie, W. (2021) ‘Literature review and prospect of the development and application of FMEA in manufacturing industry’, International Journal of Advanced Manufacturing Technology, 112(5–6), pp. 1409–1436. Available at: https://doi.org/10.1007/s00170-020-06425-0.